TH400 Conversion from M6

Transmission Down Angle Check
Stacks Image 2102
Stacks Image 2105
Tools Needed
Digital Angle Finder
Level the transmission yoke so the solid part of the yoke is level in the cross section. Place the digital protractor on the yoke of the transmission running parallel with the car. Record this measurement. In this case an angle falling from the front of the car to the rear of the car of 2.8 degrees was measured. We then rotated the transmission tails haft 180 degrees and took another measurement to confirm the first. It was 3.1 degrees.

The car was sitting on a 0.2 degree down angle. This is within the factory specification of 2.6 - 2.9 degrees.
Stacks Image 2109
Stacks Image 2112