TH400 Conversion from M6
Clutch and Fly Wheel Removal
Clutch and Fly Wheel Removal
Tools Needed
Ratchet
8 mm hex head socket
15 mm socket
6" extension
Ratchet
8 mm hex head socket
15 mm socket
6" extension
Disconnect the battery before proceeding.
Please read this step completely before starting.
Remove the six 8 mm hex head bolts from the clutch assembly. Be sure to have a firm grip on the heavy clutch assembly before you remove the last bolt.
Please read this step completely before starting.
Remove the six 8 mm hex head bolts from the clutch assembly. Be sure to have a firm grip on the heavy clutch assembly before you remove the last bolt.
Please read this step completely before starting.
Remove the six 15 mm bolts from the fly wheel. Be sure to have a from grip on the fly wheel before removing the last bolt.
A small pry bar or rubber mallet may be needed to loosen the fly wheel for removal. The fly wheel is very heavy so proceed with caution.
Lay the fly wheel to the side. It may be a good time to sell your clutch and flywheel assembly.
Remove the six 15 mm bolts from the fly wheel. Be sure to have a from grip on the fly wheel before removing the last bolt.
A small pry bar or rubber mallet may be needed to loosen the fly wheel for removal. The fly wheel is very heavy so proceed with caution.
Lay the fly wheel to the side. It may be a good time to sell your clutch and flywheel assembly.
A view showing the rear engine assembly.
